Enhancing the functionality of biodegradable Mg–Zn–Mn alloys using polylactic acid (PLA) coating for temporary implants

2024年10月28日09:45 来源：无

Researchers found that the functionality of Mg–Zn–Mn alloys can be enhanced by using PLA coating for temporary implants.The research proves that iodine complex can achieve effective antibacterial action in a waterborne coating. Source: jaochainoi – stock.adobe.com

Polylactic acid (PLA) was coated on biodegradable Mg–Zn–Mn alloys using a sol–gel coating technique for temporary implant applications. The presence of smooth, dense, crack-free PLA coating was evidenced using Fourier transform infrared spectroscopy (FTIR) and a scanning electronic microscope (SEM) equipped with an energy-dispersive X-ray spectroscopy (EDX) module. The strength of the bond between PLA and the Mg–Zn–Mn alloys was investigated as per ASTM D3359 and found to be 4B.

The degradation behavior was evaluated using potentiodynamic polarization and electrochemical impedance spectroscopy in a simulated body fluid (SBF) solution. The corrosion rate of the PLA–Mg–Zn–Mn sample was found to be 0.00363 mm/y, which is 73% better than the bare Mg–Zn–Mn sample (0.00493 mm/y). In addition, the results of the cytotoxicity assay indicated the cytocompatibility of the implant material on MG-63 osteoblast-like cells, confirming its safety on the bone cells. The efficacy of the use of PLA coating on the biodegradable Mg–Zn–Mn is due to the synergistic effect of both physical and chemical interactions between the PLA layer and the substrate.

Source: Journal of Coatings Technology and Research, Volume 21, pages 1525–1537, (2024)

Source:european-coatings

新闻快讯

深度专题

高端访谈

行业资讯

投稿

微信

微博

微直播